Laser Chuck
Home > Products > Laser Chuck > RY130 rear chuck

RY130 rear chuck

Optional chuck claw:

(3)Standard claw;Optional jaws:I-beam and Channel steel jaw;

(4)Claw clamping range:


Recommended gear:

Driven gear: RY240-10-0310 driven gear (Mn2.5Z72)

Drive gear: RY240-10-0320 Active gear (Mn2.5Z24), the drive gear can be customizable.


Recommended speed reducer and motor power:

Recommended reducer: Xinbao VRB-090, reducer speed ratio: 5,7 Recommended motor power: 0.85KW


Structural features:

1. One-piece fully enclosed helical gear transmission structure: higher dustproof performance and operational stability, longer service life and better user experience;

2. Universal installation dimensions of the whole series: RY130, RY160, RY220 series of universal dimensions of the rear chuck, saving the cost of bed management for each user;

3. The whole of the fine grinding chuck: The whole of the chuck is used as the reference surface for installation and positioning, which is convenient for users to install and debug;

4. Internal front cylinder transmission structure: the cylinder is directly pushed, and the clamping force is stable and reliable with the change of air pressure, which provides the basis for high bearing capacity performance;

5. Fully-sealed design of jaws: RY130. RY160. RY220 series barrel rear chuck has unique fully-sealed jaws, which reduces the possibility of jamming and reduces the need for manual maintenance.


Product Drawings

后卡图纸.jpg

Product Parameters



                                                              Performance Parameters
SpecificationOuter
Diameter( mm)
Spindle Bore(mm)Centre-height (mmTotal Weight
(Kg)
Inertia
(K g.cm ²)
Repeatability (mm)Rotary
precision (mm)
Φ470Φ140250±0.051402000000.050.05
RY130-00-00 00Single jaw stroke( mm)Single Claw thrust(KN)Processing Range(mm)Permissible pressure (M pa)
Rated speed (rpm)
Holdup Time (h)IP Grade
67.51.5±10%Φ5-φ1300.3-0.915012/


                              Appropriative jaws can be customized according to pipe fittings
Standard option GB / T3094-2000 Cold drawn special-shaped steel pipe, GB / T706-2008 Hot-rolled Steel, GB / T17395-2008 Seamless Steel Pipe Size, shape, weight and allowable deviation
Chuck modelRY130 Front chuck
Clamping range5-130mm (the specification is within the allowable load-bearing range)
Standard jaw roller length78mm
Lengthen jaws108mm
Round Tube5-130mm
Square TubeThe circumscribed circle is less than 130mm square tube (the maximum square tube is 92mm)
Rectangular TubeThe minimum short side is 5mm, and the circumscribed circle is less than 130mm  rectangular tube (maximum size 110x75)
Oval Tube/Flat Oval TubeThe minimum short axis is 5mm, and the long axis is less than 130mm oval tube
I-beamWith standard jaws:
With Lengthen jaws:Holds up to 10 gauge I-beams
 Channel steelWith standard jaws:Maximum clamping 6.3 channel steel
Equilateral angle steelWith standard jaws:Maximum clamping equilateral angle steel No. 7
Other specifications customization
Unequal angle steelWith extended jaws:Maximum clamping 10/6.3 unequal angle steel
Other specifications customization


Related Products


          

          
        
WeChat
WeChat