Optional chuck claw
(1)Standard claw;(2) I-beam and Channel steel jaw;(3) Double roller jaws;
(2)Claw gripping range:10-160mm
Recommended gear
Driven gear:RY160B-00-0030 driven gear (Mn2.5Z189)
Drive gear: RY160B-00-0220 drive gear (Mn2.5Z63), the drive gear can be custom made.
Recommended speed reducer and motor power
Recommended reducer: Xinbao VRT-110 reducer speed ratio: 5,7
Recommended motor power: 2.9KW (reducer speed ratio 5),1.8KW (reducer speed ratio 7)
Structural features:
1. One-piece fully enclosed helical gear transmission structure: higher dustproof performance and operational stability, longer service life and better user experience;
2. Convenient concentricity debugging and locking components: allow end users to easily correct the rotational concentricity of the whole machine, and enhance the accuracy and stability of the whole machine;
3. Standard claw opening in-position induction detection: The short tail cutting mode is safer, realizes automatic short tail cutting, and reduces the risk of collision of the whole machine;
4. Structural design of automatic chip removal and ash removal of the slider: automatic chip removal when the chuck is clamped, reducing the possibility of jamming and reducing the need for manual cleaning and maintenance;
5. Aluminum body surface oxidation process treatment: better dirt resistance and lower moment of inertia.
Product Drawings
Product Parameters
Specification | Outer Diameter( mm) | Centre-height (mm) | Total Weight (Kg) | Inertia (K g.cm ²) | Repeatability (mm) | Rotary precision (mm) |
Φ 215 | 125±0.05 | 85 | 2900 | ≤0.10 | ≤0.10 | |
RY220-10-0000 | Single jaw stroke( mm) | Single Claw thrust(KN) | Processing Range(mm) | Permissible pressure (M pa) | Rated speed (rpm) | IP Grade |
30 | 1.2±10% | 10-220 | 0.3-0.9 | 150 | / |
Appropriative jaws can be customized according to pipe fittings | |
Selection criteria | GB / T3094-2000 Cold drawn special-shaped steel pipe GB / T706-2008 Hot-rolled Steel GB / T17395-2008 Seamless Steel Pipe Size, shape, weight and allowable deviation. |
Chuck model | RY220 rear chuck |
Clamp range | Clamping block 1:The first position of inner clamp is10-70mm,the second position is 42-102mm; The first position of outer support is 130-190mm, the second position is 162-222mm; Clamping block 2 : The first position of inner clamp is 68-128mm, the second position is 100-160mm; Clamping block 3( with I-beam channel steel jaws): The first position of short clamp is 110-170mm, the second position is 140-200mm; long clamp is 45-105mm; (specification within the allowable load-bearing range) |
Jaw length | Length of block 1:length of inner clamp is 50mm,length of out support is 18mm; length of block 2 is 140mm; length of block 3( with I-beam channel steel jaws) :length of short jaw is 31mm,length of long jaws is 205mm; |
Round tube | The inner clamp is 10-160mm, and the outer support is 130-222mm; individual specifications needs to customize appropriative jaws. |
Square tube | The maximum size of the square tube is 100x100mm with the first jaw,and 150x150mm with the second jaw ;other specifications need customized special jaws; |
Rectangular tube | The minimum length of the short side is 10mm, and the maximum length of the long side is 200mm for rectangular tube; other specifications need to customize appropriative jaws; |
Oval Tube/Flat Oval Tube | The minimum length of the short axis is 10mm, and the maximum length of the long axis is 200mm for oval tube; other specifications need to customize appropriative jaws; |
I-beam | Using I-beam channel steel jaws can hold up to No. 20a I-beam; |
Channel steel | The I-beam channel steel jaws can hold up to No. 20 channel steel; |
Equilateral angle steel | Clamping block 1:hold up to No. 4.5; Clamping block 2:hold up to No. 12.5; other specifications need to customize appropriative jaws; |
Unequal angle steel | Standard jaws:within No5/3.2; Clamping block 2: within No.12.5/8; other specifications need to customize appropriative jaws; |
Related Products